Call Us

+1 (226) 600 2271

Our Email

ufbobat@gmail.com

Our Services

Class 1 MELT Program

To get a Class 1 driver’s licence you must:

  1. Be at least 18 years of age
  2. Hold any class of Alberta non-probationary driver’s licence (Graduated Driver’s Licensing Program drivers are not eligible for a Class 1 licence)
  3. Have an approved Alberta driver’s medical examination report completed by a physician or nurse practitioner and approved by a registry agent or Alberta Transportation’s Driver Fitness and Monitoring before taking MELT training
  4. This will ensure you are medically eligible for a Class 1 licence prior to investing in training
  5. Have successfully completed the Air Brake Program (Q Endorsement), if applicable
  6. Complete the MELT program

Step 1. Complete MELT Program

  1. Class 1 MELT program will take 113 hours to complete. This total does not include the Air Brake program, which is approximately 8.5 additional hours.
  2. Experience and Equivalency Class 1 MELT program will take 40 hours to complete. This total does not include the Air Brake program, which is approximately 8.5 additional hours. For details on the program eligibility, read the Experience and Equivalency Class 1 MELT section below.

Classroom Training

The standardized classroom session is:

  1. Class 1: 40.5 hours
  2. Experience and Equivalence Class 1: 11 hours

In-Yard Training

The standardized in-yard training session is:

  1. Class 1: 15.5 hours
  2. Experience and Equivalency Class 1: 6.5 hours

Practical Training

The standardized practical training session is:

  1. Class 1: 57 hours
  2. Experience and Equivalency Class 1: 22.50 hours

Step 2. Pass driver knowledge test

Once you complete the MELT program, go to any Alberta registry agent to complete the Class 1 MELT driver’s knowledge test.

Step 3. Schedule road test

You have the option to schedule a Class 1  driver’s road test (as applicable) through the Alberta Road Test Scheduler online or in person at any Alberta registry agent.

We will provide a vehicle for the road test that meets all legal requirements and has the following configuration.

Class 1

  1. 13-speed manual transmission
  2. full-air brake system on both tractor and trailer
  3. minimum tandem axle tractor and a tandem axle trailer
  4. fifth wheel coupling device
  5. single trailer with a minimum length of 48 feet and a minimum distance of 35 feet measured from the kingpin to the centre of each rear axle

Step 4. Pass road test

You must pass the pre-trip inspection and the driver’s road test.

Costs

Skyway Driving School charges $8,000 for Class 1 MELT program.

At Skyway Driving School, our experienced and certified instructors are dedicated to providing top-notch driver education.

Other Pages

Work Hours

©2024 ALL RIGHTS RESERVED